-
Ozone removal filter(Copper mesh carrier)
The ozone removal filter(Copper mesh carrier) developed by Hunan Xintan is an efficient ozone decomposition catalyst supported by copper wire mesh, which can decompose ozone into oxygen at room temperature. The appearance of ozone removal filter is black mesh, with the filter of 40 mesh /60 mesh /80 mesh /100 mesh or customized, the conventional size is a circular diameter of 5cm, other sizes can be customized according to user requirements. The product has the characteristics of light weight, high efficiency, low wind resistance, safe and no energy consumption, etc. It is mainly used for ozone removal and decomposition of precision electronic equipment, and can also be used for ozone analysis equipment to produce zero gas (standard gas).
-
Hopcalite powder
Hopcalite powder is made by mixing a certain proportion of MnO2 with CuO. The catalyst is in black or dark brown powder form and is a catalyst that removes CO by oxidizing CO to CO2. The catalyst produced by Hunan Xintan has the characteristics of high efficiency, high catalytic activity, low cost and long service life. It can be used as raw material for producing carbon monoxide catalyst and ozone decomposition catalyst, and can remove carbon monoxide and ozone by itself. Used as coating material, coating on honeycomb carrier; as laboratory gas detection processing materials.
-
Honeycomb CO removal catalyst
Honeycomb CO removal catalyst uses cordierite honeycomb ceramic as a carrier and is a highly active catalyst prepared from a variety of rare earth metals. The catalyst produced by Hunan Xintan has the characteristics of high structural strength, strong surface coating adhesion, and is not easy to fall off. This catalyst can not only be used to treat carbon monoxide in flue gas, but also has high catalytic performance in chlorine-containing working conditions, and can be used for the treatment of chlorine-containing organic waste gas, and is widely used in the treatment of steel flue gas, lime kiln flue gas, waste incineration smoke and other smoke.
-
Column recarburizer
Column recarburizer produced by Hunan Xintan is made of graphite powder with high carbon content and low sulfur content and adhesive. Its appearance is a black cylindrical particle with the diameter of 5~8mm or other specs., which has the characteristics of high carbon content, good absorption rate and high cost performance. Column recarburizer can be used to produce ordinary cast iron, gray cast iron and ductile cast iron. And the cost of the column recarburizer is much lower than that of graphitized petroleum coke, which can greatly reduce the production cost.
-
Calcined petroleum coke CPC recarburizer
Calcined petroleum coke CPC recarburizer is also known as calcined coke, petroleum coke, calcined petroleum coke recarburizer produced by Xintan is calcined by calcination furnace at 1250℃ temperature, effectively remove harmful substances of products, reduce volatiles and ash, and then through crushing, screening, packaging and other processes. The appearance is gray-black granular, porous. It can be processed into 0-50mm different specs. according to customer requirements, such as 1-5mm, 0.2-1mm, 0-1mm and so on. Calcined petroleum coke is raw coke by calcination and purification processing, appearance into a round grain or prismatic, has the characteristics of high carbon, low sulfur and low ash. Calcined petroleum coke is mainly used for pre-baked anode and anode paste for electrolytic aluminum, carbon industry production of carbonizing agent, graphite electrode, smelting industrial silicon and fuel.
-
ozone O3 decomposition catalyst/destruction catalyst
ozone decomposition catalyst produced by Xintan is used to destroy ozone from exhaust emission. Made from manganese dioxide(MnO2) and copper oxide(CuO),it can decompose ozone into oxygen efficiently at ambient temperature and humidity,without any additional energy.It doesn’t include any activated carbon material.
It features high efficiency,stable performance and long working life（2-3years),Ozone destruction catalyst is widely applied in ozone generators ,commercial printers,waster water treatment ,disinfection and sterilization which is related to ozone application.
-
Carbon Dioxide (CO2) absorbent Calcium Hydroxidet Soda Lime
Carbon dioxide adsorbent, also known as calcium hydroxide particles and soda lime, is pink or white columnar particles, loose and porous structure, large adsorption surface area, good permeability. The white particles, after absorbing carbon dioxide, become purple, and the pink particles, after absorbing carbon dioxide, become white. Its carbon dioxide absorption rate is very high, can be widely used in oxygen breathing apparatus and self-rescue device to absorb human exhaled carbon dioxide, as well as chemical, mechanical, electronic, industrial and mining, medicine, laboratory and other need to absorb carbon dioxide environment.
-
Modified honeycomb activated carbon
Modified honeycomb activated carbon is processed with coal charcoal powder, coconut shell charcoal powder, wood charcoal powder and other raw materials, and then through special physical and chemical treatment methods to change the characteristics of honeycomb activated carbon, so that it has large specific surface area, developed micropores, low fluid resistance, increased adsorption capacity, longer service life and other characteristics. The modified cellular activated carbon is divided into two kinds of products: water resistant and water resistant.
-
Carbon Molecular Sieve (CMS)
Carbon molecular sieve is a new kind of adsorbent, which is an excellent non-polar carbon material. It is mainly composed of elemental carbon and appears as a black columnar solid. Carbon molecular sieve contains a large number of micropores, these micropores on the instantaneous affinity of oxygen molecules is strong, can be used to separate O2 and N2 in the air. In industry, pressure swing adsorption device (PSA) is used to make nitrogen. Carbon molecular sieve has the characteristics of strong nitrogen generating capacity, high nitrogen recovery rate and long service life. It’s suitable for various types of pressure swing adsorption nitrogen generator.
-
Activated alumina /Reactive alumina ball
Activated alumina is an excellent adsorbent and desiccant, and its main component is alumina. The product is white spherical particles, which play the role of drying and adsorption. Activated alumina desiccant is an essential product for compressed air dehydration and drying. In industry, activated alumina adsorption dryer is almost the only choice for the preparation of dry compressed air below zero pressure dew point, activated alumina can also be used as a fluorine absorption agent.
-
VOC catalyst with Noble metal
Noble-metal catalyst (HNXT-CAT-V01) uses bimetal platinum and copper as the active components and cordierite honeycomb ceramics as the carrier, a small amount of rare earth materials were added through special process to make the catalyst structure more stable, the surface active coating has stronger adhesion and is not easy to fall off. Noble-metal catalyst (HNXT-CAT-V01) has excellent catalytic performance, low ignition temperature, high purification efficiency, and good temperature resistance, suitable for conventional VOCs gas treatment, benzene treatment effect is good, and can be widely used in CO and RCO devices.
-
Hopcalite Catalyst/Carbon monoxide (CO) Removal Catalyst
Hopcalite catalyst, also named as Carbon monoxide (CO) removal catalyst, is used to remove CO by oxidizing CO into CO2.This catalyst adopts unique nanotechnology and inorganic non-metallic material formula, the main ingredients are CuO and MnO2,.The appearance is columnar particles.Under the condition of 20~200℃, the catalyst can catalyze the reaction of CO and O2 quickly and efficiently with free energy, converting CO into CO2,featuring high efficiency, energy saving and low maintenance cost. Xintan Hopcalite is widely applied in industrial gas treatment like nitrogen (N2) ,gas mask,refuge chamber and compressed air breathing equipment.
